FilterSepta® works as an above-ground interceptor and filter system. It is designed for site operators concerned that their existing oil and water separating pump systems may need additional support.
FILTERSEPTA® MK2
General
FilterSepta® works as an above-ground interceptor and filter system. It is designed for site operators concerned that their existing oil and water separating pump systems may need additional support.
An additional and highly cost-effective, secondary containment safeguard for sites where extra caution is required.
• Environmentally critical sites where there is concern about pumped water discharge through soak-away.
• Surface water drainage where there is no underground drainage interceptor or separator.
FilterSepta® is ideally partnered with the BundGuard®
In rigorous tests, BundGuard® is shown to separate oil and water extremely effectively, in fact less than 5 parts per million of oil present in pumped discharge water.
A cost-effective, secondary containment safeguard
FilterSepta® is designed for site operators concerned that to be absolutely safe and due to site conditions, their existing oil and water separating pump systems may need additional support.
FilterSepta® is an additional and highly cost-effective, secondary containment safeguard for sites where extra caution is required and is recommended for environmentally critical sites and/or where there is concern about pumped water discharge through soak-away or surface water drainage where there is no underground drainage interceptor or separator. FilterSepta® eliminates the need for costly underground interceptor or separator tanks to be installed and maintained.
FilterSepta® performs to the requirements of a Class 1 full retention oil/water separator and relevant section EN858-1:2002 under test conditions.
FilterSepta® is ideal for both retro-fit and new installations. FilterSepta® works as an above-ground interceptor and filter system and is ideally partnered with Andel’s BundGuard®. In rigorous tests, BundGuard® is shown to separate oil and water extremely effectively, in fact less than 5 parts per million of oil present in pumped discharge water. FilterSepta removes any oil or debris, however small, still present in the pumped water which allows discharge through existing surface water drainage.
For more information click here to go to the manufacture’s website.
Related Information
Additional Information
Specifications
Technical information
- Inlet: barbed hose tail to connect 1” ID hose
- Outlet: 100mm discharge pipe
- Automatic bypass overflow (water return to bunded area)
- Nominal height: 824mm
- Nominal width: 500mm
- Nominal length: 1200mm
- Total liquid retention capacity: 300 litres
- Sludge volume: 100 litres
- Maximum oil storage: 70 litres, 150mm oil layer
- Maximum chamber depth: 710mm (allows for easy cleaning and maintenance as and when required)
- Typical flow rates: around 3 litres/second (depending on site conditions)
For more information click here to go to the manufacture’s website.
Features
- Accessible silt trap chamber – easy and safe to empty, clean and maintain
- Accessible coalescing filter media – both filters are easy and safe to remove, clean and maintain on site, no need for disposal or replacement
- If there is a significant build up of oil within the second chamber, an oil sensor will shut off the BundGuard®, which in turn will alert the site of an issue
- Lightweight, robust construction from 100% recycled plastic (HDPE). No mechanical lifting equipment required for delivery and installation and well within capacity of a two-person lift
- Robust double-extrusion welded throughout for extreme durability
- Manual lifting lugs positioned to allow for safe lifting below head height – crucial for High Voltage Sites
- No exposed metal parts – eliminating the risk of arcing in High Voltage Sites and minimising metal corrosion
- Extremely high gravity outflow of 3 litres per second (site conditions may vary)
- Sludge volume of 100 litres – allowing for extended maintenance breaks
- Automatic bypass overflow returns water to the bunded area – avoiding contamination to the unit
For more information click here to go to the manufacture’s website.
