This traditional series of volumetric gear pumps obtained by earth casting is mainly used for the transfer of liquids up to 15 bar.
In the case of products of medium/high viscosity, the pumps of this series can be used for metering services with the aid of frequency variators or motor variators, also electrically servo-controlled with a 4 ÷ 20 mA signal or pneumatically with a 3 ÷ 15 psi signal.
APPLICATIONS
The main applications of B MG Series transfer pumps are:
Transfer of oils, naphtha, diesel fuel.
The pumping of molasses and other liquid products for animal feeding.
Pumping of hydraulic oil for the lubrication of large industrial compressors.
High pressure thrust of foaming agent.
Pumping of glues, resins, paints, preheated greases, adhesives, isocyanates, polyols, polymers, shampoos.
The transfer and metering of any type of liquid with the absence of solid suspensions.
The construction of this series of gear pumps complies with the 2006/42/CE, 2014/30/UE, 2014/35/UE directives and the UNI EN ISO 12100, UNI EN ISO 13732-1, UNI EN 809, UNI EN ISO 14847 standards. On request versions compliant with the 2014/34/EU (ATEX) directive and with the API 676 – NACE MR0175 standards; it is also available with EAC (CU TR 010) – CU TR 012 certification.
The management of the quality system of Pompe Cucchi Srl operates in accordance with the UNI EN ISO 9001: 2015 standard.
MATERIAL: The B series pumps can be made of cast iron, bronze or AISI316L stainless steel (for models from size 200 to 600).
Shafts and gears are subjected to a special anti-wear and anti-seize-up heat treatment. The materials used vary according to the type of pump.
Pump Power Australia is based in Brooklyn Victoria, the industrial heartland of Western Melbourne. Well situated to supply local needs, with reliable access to transport links for regional, interstate and overseas customers.
© Copyright 2024 | PUMP POWER | All Rights Reserved
