Pompe Cucchi has created this new series of gear pumps made from steel bars in order to obtain high quality pump bodies with the total absence of cracks and/ or casting defects
Pompe Cucchi S/SK SERIES MAGNETIC DRIVE GEAR PUMPS
General
APPLICATIONS
The main applications of the S/SK/SM series drag transfer pumps are:
CHEMICAL SECTOR
The transfer and metering of any type of liquid with the absence of solid suspensions.
FOOD INDUSTRY
The transfer of liquids in the primary transformation processes – pumping of chocolate – fats jams etc.
AGRICULTURAL SECTOR
The pumping of molasses and other liquid products for animal feeding.
INDUSTRIAL SECTOR
The pumping of glues, resins, bases, acids, isocyanates, polyiols etc.
S SERIES PUMPS
Versions: spheroidal cast iron, carbon steel, bronze, AISI 316L. On request: Hastelloy C, Titanium, Duplex etc.
The version in AISI 316L stainless steel has an anti-wear-anti-seize-up heat treatment that makes the component parts of the pump black (“black treatment”). For food applications it is possible to insert FDA certified “FC” plastic gears, leaving the parts in AISI 316L unaltered.
SK SERIES PUMPS
The standard version of this type of pump is identical to the S series with the difference being that the motion is supported through bushings and shims in FDA-certified graphite (on request they are available in silicon carbide).
In this way, the impossibility of seizing up in case of dry running is guaranteed. In addition, this arrangement allows the total maintenance of the pump directly on the system without the aid of equipment or adjustments.
MAGNETIC DRIVE
For all models it is possible to install a magnetic drive. This application is particularly suitable in the presence of corrosive, toxic, dangerous and polluting liquids.
The magnetic drive guarantees the absolute absence of leaks and solves all pumping problems in plants where environmental and human safety are of the utmost priority.
The main advantages of the magnetic drive are:
- Very high efficiency and minimum power absorption.
- No leaking of product into the environment.
- No expensive control equipment is required.
- Reduced maintenance costs.
- Simple assembly with a reduced number of spare parts.
- Control of minimum pressure.
- Reduced costs when compared to double mechanical seals with flushing.
The standard version of the magnetic drive is: internal rotor coated in AISI 316 Ti (DIN 1.4571) containment cup in AISI 316Ti, – external rotor in ST37 steel. On request, it is possible to supply Hastelloy (C or D) or Titanium rotors. The temperature range goes from –40°C to +350°C with a maximum torque of 80 Nm. The bearing bushings are provided in filled PTFE, self-lubricating sintered materials or FDA-certified graphite. On request also in silicon carbide. In all those applications where a special surface finish is required, it is possible to carry out a mirror polishing of both the pump and the lantern.
HH HEAT TREATMENT
In particularly onerous applications, it is possible to equip the pump with gears and/or shafts with the heat treatment called “HH” (High Hardness).
This innovative heat treatment significantly increases the life of the gears and gives the treated parts greater resistance to corrosion by chemical agents, a very low coefficient of friction and a very high degree of wear resistance.
It also makes it possible to obtain a surface hardness of 4000 Vickers. The same process is used by one of the major Formula 1 teams for the treatment of some parts of the engine that are particularly prone to wear.
Special plastic gears have been made for special applications. These new gears, called “KK”, have superior mechanical and chemical characteristics when compared with the same characteristics of the plastic materials currently on the market.
FDA-certified “FC” plastic gears are also available.
The seal can be made with packings (design temperature 300°C) or single or double mechanical seals (design temperature 200°C) in various materials selected on the basis of the chemical-physical characteristics of the pumped liquid. The construction standard foresees a mechanical seal in ceramic/graphite/Viton.
The construction of this series of gear pumps complies with the 2006/42/CE, 2014/30/UE, 2014/35/UE directives and with the UNI EN ISO 12100, UNI EN ISO 13732-1, UNI EN 809, UNI, EN ISO 14847 standards. On request, versions compliant with the 2014/34/EU (ATEX) directive and with API 676 – NACE MR0175 standards; it is also available with EAC (CU TR 010) – CU TR 012 certification.
The quality system of Pompe Cucchi S.r.l. operates in accordance with the UNI EN ISO 9001: 2015 standard.
The S, SK series is used in numerous sectors in the transfer of liquids with viscosities from 1 to 100,000 Cps. In the case of medium/high viscosity products, it can be used for metering services with the aid of frequency variators or motor variators, also electrically servo-controlled with a 4 ÷ 20mA signal or pneumatically with a 3 ÷ 15 psi signal.
Features
CONSTRUCTION FEATURES
The pumps of this series are supplied individually either on a base or with a lantern for connection to motors, gearmotors and variators with construction in accordance with CE regulations.
All models are provided with Gas threaded ports or weld-on connections, and can be integrated with ANSI or DIN flanges. On request, versions with a built-in safety valve and preheating chambers are available.
